Monte Carlo Simulation for Polychromatic X-ray Fluorescence Computed Tomography with Sheet-Beam Geometry

X-ray fluorescence computed tomography based on sheet-beam can save a huge amount of time to obtain a whole set of projections using synchrotron. However, it is clearly unpractical for most biomedical research laboratories. In this paper, polychromatic X-ray fluorescence computed tomography with sheet-beam geometry is tested by Monte Carlo simulation. First, two phantoms (A and B) filled with PMMA are used to simulate imaging process through GEANT 4. Phantom A contains several GNP-loaded regions with the same size (10 mm) in height and diameter but different Au weight concentration ranging from 0.3% to 1.8%. Phantom B contains twelve GNP-loaded regions with the same Au weight concentration (1.6%) but different diameter ranging from 1mm to 9mm. Second, discretized presentation of imaging model is established to reconstruct more accurate XFCT images. Third, XFCT images of phantom A and B are reconstructed by fliter backprojection (FBP) and maximum likelihood expectation maximization (MLEM) with and without correction, respectively. Contrast to noise ratio (CNR) is calculated to evaluate all the reconstructed images. Our results show that it is feasible for sheet-beam XFCT system based on polychromatic X-ray source and the discretized imaging model can be used to reconstruct more accurate images

Why Rice Farmers Don't Sail: Coastal Subsistence Traditions and Maritime Trends in Early China

The Lower Yangtze River Valley is a key region for the early development of rice farming and the emergence of wet rice paddy field systems. Subsistence evidence from Neolithic sites in this area highlights the importance of freshwater wetlands for both plant and animal food resources. Early Neolithic rice cultivators looked inland, especially to wetlands and nearby woodlands, for their main protein sources. Links to the sea among these Neolithic populations are notably scarce. Due to the high yields of wet rice, compared with other staple crops as well as dryland rice, the wetland rice focused subsistence strategy of the Lower Yangtze would have supported high, and increasing, local population densities. Paddy agriculture demands labor input and water management on a large scale, which would have stimulated and reinforced trends towards more complex societies, such as that represented by Liangzhu in the lower Yangtze region. Population growth could have been largely absorbed locally, suggesting that population packing, not migration, was the dominant trend. Other case studies of agricultural dispersal, for the Korean Peninsula and Japan further illustrate the lack of correlation between the spread of rice agriculture and wet rice cultivation. Although wet rice cultivation was a pull factor that drew local populations towards increased density and increased social complexity, it did not apparently push groups to migrate outwards. Instead, the transition from wetland to rain fed rice cultivation systems and/or the integration of rice with rain fed millet crops are much more likely to have driven the demographic dynamics that underpin early farmer migrations and crop dispersal

Synthesized trade-off analysis of flood control solutions under future deep uncertainty: An application to the central business district of Shanghai.

Coastal mega-cities will face increasing flood risk under the current protection standard because of future climate change. Previous studies seldom evaluate the comparative effectiveness of alternative options in reducing flood risk under the uncertainty of future extreme rainfall. Long-term planning to manage flood risk is further challenged by uncertainty in socioeconomic factors and contested stakeholder priorities. In this study, we conducted a knowledge co-creation process together with infrastructure experts, policy makers, and other stakeholders to develop an integrated framework for flexible testing of multiple flood-risk mitigation strategies under the condition of deep uncertainties. We implemented this framework to the reoccurrence scenarios in the 2050s of a record-breaking extreme rainfall event in central Shanghai. Three uncertain factors, including precipitation, urban rain island effect and the decrease of urban drainage capacity caused by land subsidence and sea level rise, are selected to build future extreme inundation scenarios in the case study. The risk-reduction performance and cost-effectiveness of all possible solutions are examined across different scenarios. The results show that drainage capacity decrease caused by sea-level rise and land subsidence will contribute the most to the rise of future inundation risk in central Shanghai. The combination of increased green area, improved drainage system, and the deep tunnel with a runoff absorbing capacity of 30% comes out to be the most favorable and robust solution which can reduce the future inundation risk by 85% (±8%). This research indicates that to conduct a successful synthesized trade-off analysis of alternative flood control solutions under future deep uncertainty is bound to be a knowledge co-creation process of scientists, decision makers, field experts, and other stakeholders

Numerical and Monte Carlo Simulation for Polychromatic L-Shell X-ray Fluorescence Computed Tomography Based on Pinhole Collimator with Sheet-Beam Geometry

X-ray fluorescence computed tomography (XFCT) has attracted wide attention due to its ability to simultaneously and nondestructively obtain structural and elemental distribution information within samples. In this paper, we presented an image system based on the pinhole collimator for the polychromatic L-shell XFCT to reduce time consumption and improve the detection limit. First, the imaging system model was expressed by formulas and discretized. Then, two phantoms (A and B) were scanned by numerical simulation and Monte Carlo simulation. Both phantoms with the same diameter (10 mm) and height (10 mm) were cylinders filled with PMMA, and embedded with GNP-loaded cylinders. The phantom A was inserted by six 1.5 mm-diameter cylinders with different Au concentrations ranging from 0.2% to 1.2%. The phantom B was inserted by eight cylinders with the same Au concentration (1%), but a radius ranging from 0.1 mm to 0.8 mm. Finally, the reconstruction of the XFCT images was performed using the method with and without absorption correction, respectively. The feasibility of XFCT system presented in this paper was demonstrated by the numerical simulation and the Monte Carlo simulation. The results show that absorption attenuation can be corrected by the presented method, and the contrast to noise ratio (CNR) is proportional to Au concentration but almost remains unchanged with the radius of GNP-loaded cylinders, which may provide the necessary justification for further optimization of the imaging system

Numerical and Monte Carlo Simulation for Polychromatic L-Shell X-ray Fluorescence Computed Tomography Based on Pinhole Collimator with Sheet-Beam Geometry

X-ray fluorescence computed tomography (XFCT) has attracted wide attention due to its ability to simultaneously and nondestructively obtain structural and elemental distribution information within samples. In this paper, we presented an image system based on the pinhole collimator for the polychromatic L-shell XFCT to reduce time consumption and improve the detection limit. First, the imaging system model was expressed by formulas and discretized. Then, two phantoms (A and B) were scanned by numerical simulation and Monte Carlo simulation. Both phantoms with the same diameter (10 mm) and height (10 mm) were cylinders filled with PMMA, and embedded with GNP-loaded cylinders. The phantom A was inserted by six 1.5 mm-diameter cylinders with different Au concentrations ranging from 0.2% to 1.2%. The phantom B was inserted by eight cylinders with the same Au concentration (1%), but a radius ranging from 0.1 mm to 0.8 mm. Finally, the reconstruction of the XFCT images was performed using the method with and without absorption correction, respectively. The feasibility of XFCT system presented in this paper was demonstrated by the numerical simulation and the Monte Carlo simulation. The results show that absorption attenuation can be corrected by the presented method, and the contrast to noise ratio (CNR) is proportional to Au concentration but almost remains unchanged with the radius of GNP-loaded cylinders, which may provide the necessary justification for further optimization of the imaging system